www.restek.it

Phthalate Esters by U.S. EPA Method 606 on Rtx-5
Peaks | |
---|---|
1. | Dimethyl phthalate![]() |
2. | Diethyl phthalate![]() |
3. | di-n-Butyl phthalate![]() |
Peaks | |
---|---|
4. | Butyl benzyl phthalate![]() |
5. | Bis(2-ethylhexyl)phthalate![]() |
6. | Di-n-octyl phthalate![]() |

Column | Rtx-5, 30 m, 0.53 mm ID, 1.50 µm (cat.# 10270) |
Sample | 606 Phthalate esters calibration mix (cat.# 31031) |
Conc.: | 25 ng per component |
Injection | |
Inj. Vol.: | 2.5 µL splitless |
Inj. Temp.: | 300 °C |
Oven | |
Oven Temp.: | 40 °C (hold 6 min) to 300 °C at 10 °C/min (hold 15 min) |
Carrier Gas | H2, constant linear velocity |
Linear Velocity: | 80 cm/sec |
Detector | FID @ 300 °C |
Notes | FID sensitivity: 8 x 10-11 AFS Flow rate: 10 cc/mL |
Consigli per la stampa! Per stampare cromatogrammi su tutta la pagina, cambiare le impostazioni di stampa nella finestra di stampa del vostro software PDF reader: 1)"adatta" o "adatta alla pagina", 2)"panorama" per cromatogrammi grandi o "ritratto" per cromatogrammi alti.