Vials e Piastre a pozzetti

• Vials packaged in a clear-lid tray.
• Preassembled caps with septa packaged separately in a plastic bag.
• Black polypropylene open-hole caps and 8 mm red PTFE/silicone septa, 0.065".

• Centinaia di operazioni con una sola ricarica
• L’ottima visibilità dello schermo OLED consente di ottimizzare la potenza di crimpaggio per ogni tipologia di tappo, monitorare l’utilizzo della batteria e visualizzare le statistiche relative alla durata.
• Batteria di grandi dimensioni che consente un ciclo di ricarica più veloce e due modalità sleep che possono prolungare la durata della batteria.
• Facile da usare; presa confortevole.
• Tutti i kit contengono un set di spine universali per il caricabatteria.
• Destinato all’uso con tappi da 11 mm e 20 mm.
• Garanzia di un anno.

• Nessuna batteria da sostituire: l'alimentatore fisso fornisce una potenza costante e affidabile. Disponibile con adattatori per Cina, Europa, Giappone, Taiwan, Regno Unito e Stati Uniti.
• L’ottima visibilità dello schermo OLED consente di ottimizzare la potenza di crimpaggio per ogni tipologia di tappo, monitorare l’utilizzo della batteria e visualizzare le statistiche relative alla durata.
• I set di ganasce intercambiabili consentono di acquistare solo la dimensione della crimpatrice necessaria (11 mm o 20 mm).
• Risparmia tempo e di riduci al minimo le regolazioni memorizzando programmi separati per ogni tipologia di tappo e guarnizione.
• Di fattura robusta per essere utilizzato con tutti i tappi in acciaio e magnetici
• Due comode opzioni di modalità sleep.
• Da abbinare alla base opzionale e al kit di montaggio per un funzionamento automatico.

• Recommended for samples containing less than 10% solid particulates.
• Easy-to-use vials offer fast sample filtration and require only a squeeze of your fingers.
• Minimize sample loss by eliminating multiple transfers.
• Color-coded caps allow easy identification of 0.2 μm or 0.45 μm membranes in PVDF, PTFE, PES, or nylon.
• Preslit PTFE/silicone caps help eliminate broken autosampler needles and cored septa.
• Rugged polypropylene vial houses insert with 450 μL loading capacity and low dead volume (120 μL).
• Fit most standard 12 x 32 mm autosamplers, including UHPLC instruments.

• Certificates enclosed with each kit.
• Vials of clear or amber borosilicate glass with ID marking spots.
• Closures with pre-inserted septa.
• Each kit sealed for integrity.

• Elongated neck allows for consistent, reliable autosampler pick up.
• 9 mm opening is ideal for sampling and pipette use.

• Container, liner, and closure cleaned, assembled, and lot traceable.
• Open-top caps.
• PTFE faced 0.125" silicone septa.
• Cleaned to U.S. EPA Protocol B specifications.

• Two sizes available.
• Tapered for high recovery of contents.
• Work with Mininert sampling valves.

• Plastic vial.
• Choice of glass or polypropylene fused insert.

• 40% larger opening than other vials.
• Step profile automatically centers glass flange limited volume inserts.
• Preassembled caps with septa, with or without vials.
• Designed for Waters Alliance autosamplers.

• Plastic vials.
• Choice of glass or fused polypropylene insert.

Caps attached to vials.

• Protect contents and prevent carryover.
• Highly chemically resistant silicone mats with PTFE coating are autoclavable and preconditioned for low bleed.
• Preslit silicone provides resealability and resists coring or tearing after multiple needle injections.
• Designed for more effectively sealing 0.45, 1.3, and 2.0 mL plates specifically with square wells.

• Compatible with all 9 mm screw-thread vials.
• Molded, 10 mil, solid, pierceable cap.
• PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods.

Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa. However, since polypropylene caps do not reseal, evaporation occurs after injection. Multiple injections from the same vial are therefore not possible.

• Available in 1.5 mL or 700 μL volumes.
• Limited-volume design fits all 2.0 mL, 12 x 32 mm, vial-based autosamplers.
• Compatible with all 9 mm screw-thread caps.
• PTFE-free—ideal for PFAS analysis (e.g., EPA 537) and other PFAS-sensitive methods.

Note: Polypropylene vials and caps prevent sample contamination from PTFE coated septa. However, since polypropylene caps do not reseal, evaporation occurs after injection. Multiple injections from the same vial are therefore not possible.

• Polypropylene plates with round-bottom wells reduce liquid retention; conical bottom provides optimal recovery of reagents.
• Nunc shared wall technology allows increased well volume for optimum storage capacity and improved mixing.
• Round well shape is ideal for applications that require vortexing.
• Ideal for sample collection, storage, sampling, and combinatorial chemistry and library applications.
• Fits most autosampler compartments.
• All microplates manufactured by Nunc meet the recommendation of American National Standards Institute (ANSI) (ANSI/SBS 1-2004).

• Snaps on any crimp-style vial.
• Save money! Use this snap cap when you don’t need to crimp.

• Il setto Micro-thin viene penetrato con facilità evitando di piegare aghi o rompere fibre SPME.
• La configurazione del setto più spesso all'esterno consente una buona tenuta e mantiene il setto in posizione all'interno del tappo.
• La versatilità di questi tappi garantisce ottime performance sia per applicazioni SPME sia per spazio di testa dinamico e statico.
• Questi setti vengono prodotti con siliconi a basso rilascio e conformati per rientrare nelle specifiche dimensionali.
• Disponibili in tappi magnetici a vite da 18 mm e crimp da 20 mm.

The separate crimper and decapper jaw sets fit standard lab vial seals that are aluminum or two-part aluminum/steel caps.

To switch jaw sets, simply insert the jaw set into the bushing at the bottom of the tool. Push up and twist until the set locks into position. To remove, push the outside button and rotate.

• Securely holds up to 36 headspace vials (fits 6, 10, or 20 mL vials).
• Vials lock in rack for convenient one-handed cap removal.
• Openings in the bottom of each well facilitate drainage.
• Alphanumeric indexing on rack simplifies sample identification.
• Easy to clean and fully autoclavable.*
• Stackable—even with vials in place.

• Protect contents and prevent carryover with preslit cap mats.
• Chemically resistant, silicone mats are excellent for compound storage to -80 °C.
• Preslit mats pierceable by autosampler needle, pipette tip, or probe.
• Universal mat for sealing 0.45, 1.3, and 2.0 mL plates.

• Racks feature alphanumeric indexing for easier vial identification.
• Racks can be stacked for efficient storage.
• Fits most 2.0 mL, 12 x 32 mm vials (vials sold separately).